![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() Bottom Drains |
![]() |
Many pond builders have found that adding a bottom drain helps keep a pond cleaner. Fish waste and other muck that accumulates on a pond bottom can be easily removed by a bottom drain. Ponds that are over 2' deep can become stagnant without a bottom drain. This bottom drain is installed under the liner. Flex PVC pipe carries the water under the liner to the skimmer box. A bulkhead fitting is installed in the skimmer. A PVC male adapter connects the flex PVC to the bulkhead fitting. A valve is placed inside the skimmer box to control flow. When the pump is turned on, water will flow into the skimmer through the skimmer faceplate (surface water) as well as the bottom drain. You can control how much water goes through the top and bottom inlets with the valve on the bottom drain. The kits contain bottom drain, bulkhead fitting, valve and fittings. Does not include PVC pipe. Click here for image and diagram. |
|
ID# |
Item |
Price$ |
Secure Shopping Cart! |
BDK2 |
2" Bottom drain kit |
173.00 |
|
| BDK3 | 3" Bottom drain kit | 208.00 |
Bottom Drain with Air Diffuser 3" bottom drain with diffuser all in one unit. Circulation created by air diffuser, increases the amount of debris removed by bottom drain. Increases oxygen level in the pond. Bottom drain has 6 stainless steel screws and 2 rubber gaskets for a positive seal when penetrating liner. Connects to 3" PVC pipe and fittings. Air diffuser is set up for 1/2" tubing. Air diffuser recommended air flow of 1/2 to 2 CFM. |
![]() |
ID# |
Description |
Price |
Secure Shopping Cart |
BDA |
3" Bottom Drain with Air Diffuser |
176.00 |
![]() |
The TetraPond Bottom Drain is an important accessory for achieving optimal water quality. Installed at the deepest point of the pond, this engineered device encourages debris and waste to flow into a circular collection chamber where it is then carried away underground via standard 3" PVC pipe (not included) to a disposal area away from the pond. It's dome-like shape is designed to force debris and waste to flow into a collection area while preventing debris from settling on top of the drain or away from the collecting vents. In seconds, accumulated debris is permanently removed. |
ID# |
Item |
Price$ |
Secure Shopping Cart! |
Tet16360 |
Tetra Bottom Drain |
69.00 |
Contact Information:
|
| Telephone: 1-888-838-4017 |
Fax: 1-877-878-6813
|
Mail Address: Just Liners, Inc.
|
P. O. Box 79
|
Bogota, TN 38007
|
![]() |
We accept all all major credit cards, certified checks or money orders. |
© 2001 Just Liners, Inc. All Rights Reserved. |
Shipping is not included in product prices unless otherwise specified. |
We only ship within the 48 U.S. Continental States. |
We do not ship internationally due to stricter customs regulations. |
All purchases made within the state of TN are subject to TN sales tax |
Information
|
||
Pond Liners |
||||