|
PVC
Geomembrane Specification
|
Typical
Property
|
Test
Method
|
20
Mil
|
30
Mil
|
| Gauge
(nominal) |
--------- |
20 |
30 |
| Thickness
(mils) |
ASTM
D1593 |
+5% |
+5% |
| Specific
Gravity |
ASTM
D792 |
1.2 |
1.2 |
| Tensile
Properties |
ASTM
D882 |
|
|
| -Break
Strength |
Method
A (MD&TD) |
48 |
73 |
| -Elongation
at Break % |
Method
A (MD&TD) |
350 |
350 |
| -Modulus
at 100% |
Method
A (MD&TD) |
23 |
34 |
| Tear
Resistance. lbs/in. |
ASTM
D1004, Die C |
6.5 |
8.5 |
| Low
Temp, pass |
ASTM
D1790 |
-26C |
-29C |
| Dimensional
Stability |
ASTM
D1204 (MD&TD) |
4 |
3 |
| Water
Extraction |
ASTM
D3083 |
0.15 |
0.15 |
| Violatile
Loss |
ASTM
D1203(A) |
0.9 |
0.7 |
| Resistance
to Soil Burial |
ASTM
D3083 |
|
|
| -Breaking
Factor |
|
5% |
5% |
| -Elongation
at Break |
|
20% |
20% |
| -Modulus
at 100% |
|
20% |
20% |
| Water
Vapour Transmission |
ASTM
D814, max |
5.0x10-9 cm/sec
|
5.0x10-9 cm/sec |
| Hydrostatic
Resistance, lbs/in2 |
ASTM
D751 (A) |
68 |
100 |
| Minimum
Specifications for Factory Fabricated Seams: |
|
|
|
| Peel
Strength, lbs/in. |
|
12.5 |
15 |
| Shear
Strength, lbs/in. |
|
38.4 |
58.4 |
Disclaimer:
To the best of our knowledge, these are typical property values
and are intended as guides only, not as specification limits.
Just Liners makes no warranties as to the fitness for a specific
use or merchantability of products referred to, no guarantee
of satisfactory results from reliance upon contained information
or recommendations and disclaims all liability for resulting
loss or damage.
Back to top
Contact Information:
|
| Telephone: 1-888-838-4017 |
Fax: 1-877-878-6813
|
Mail Address: Just Liners, Inc.
|
P. O. Box 79
|
Bogota, TN 38007
|
|
|
We accept all all major credit cards, personal or certified checks and wire transfers.
|
© 2001 Just Liners, Inc. All Rights Reserved.
|
Shipping is not included in product prices unless otherwise specified.
|
We only ship within the 48 U.S. Continental States.
|
We do not ship internationally due to stricter customs regulations.
|
|
