Back to JPL12
Pulldown Menu by v5.7

JPL-12 Liner/Top Cover
Low Temperature- Hydrocarbon Stable
Description Black 12 x 12 count per inch  
Weight PER YD2 5.8 OZ. ASTM D 1910
NOMINAL Thickness 12 MILS (+/-10%)
Tensile Strength (Grab Method) WARP 205 LBS. ASTM D 5034
Elongation to Break WARP 35%  
Tear Strength (Tongue Method) WARP 62 LBS/INCH ASTM D 58441
Bursting Strength (Diaphragm Method) 300 PSI ASTM D 3786
Hydrostatic Resistance 130 PSI ASTM D 751
Puncture Resistance 69 LBS FED.STD.101C, Method 2065
76 LBS ASTM D 4833
Moisture Vapor Transmission .222 GRAMS/M2/24HRS ASTM E 96 B
Low Temperature Cold Crack -40F ASTM D 2136
Permeability 0.0143 CM/SEC ASTM D 4491
Carbon Black Content 2.79% ASTM D 4218
Carbon Black Dispersion A-1  
UV Resistance 98% Strength Retained after 2000 HRS ASTM G-151

Disclaimer: To the best of our knowledge, these are typical property values and are intended as guides only, not as specification limits. Just Liners makes no warranties as to the fitness for a specific use or merchantability of products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability for resulting loss or damage.

Contact Information:
Telephone:       1-888-838-4017
Fax:                1-877-878-6813
Mail Address:  Just Liners, Inc.
                      P. O. Box 79
                      Bogota, TN 38007
Major Credit Cards
We accept all all major credit cards, certified checks or money orders.
  © 2001 Just Liners, Inc. All Rights Reserved.
Shipping is not included in product prices unless otherwise specified.
We only ship within the 48 U.S. Continental States.
We do not ship internationally due to stricter customs regulations.
All purchases made within the state of TN are subject to TN sales tax
Pond Liners
Pond & Animal Supplies