|
EPDM
Technical Information Sheet
|
Property
|
Test
Method
|
Minimum
Performance
|
|
Specific
Gravity
Breaking Strength
|
ASTM
D-297
ASTM D-751 A
|
1.15
+ .05
90 lbf
(400 N)
|
|
Elongation
Tear Strength
|
ASTM
D-412
ASTM D-751 B
|
250%
minimum
10 lbs minimum
(45N)
|
|
Ozone
Resistance
7 days/100 pphm @ 100°F with 50%
extension
|
ASTM
D-1149
|
No
Cracks
|
|
Heat
Aging
28 days @ 240°F
|
ASTM
D-573
|
Breaking
Strength
minimum 80 lbf (356N)
Elongation min. 200%
|
|
Brittleness
Temp.
|
ASTM
D-2137
|
-49°F
(-45°C)
|
|
Water
Resistance
change in weight after immersion 7 days @ 150°F, %
|
ASTM
D-471
|
+
8, - 2
|
|
Water
vapor
permeability
max, perm mils
|
ASTM
E-96
|
2.0
|
|
Tolerance
on Nominal thickness, %
|
ASTM
D-751
|
+
10
|
Disclaimer:
To the best of our knowledge, these are typical property values
and are intended as guides only, not as specification limits.
Just Liners makes no warranties as to the fitness for a specific
use or merchantability of products referred to, no guarantee
of satisfactory results from reliance upon contained information
or recommendations and disclaims all liability for resulting
loss or damage.
Back to top
Contact Information:
|
| Telephone: 1-888-838-4017 |
Fax: 1-877-878-6813
|
Mail Address: Just Liners, Inc.
|
P. O. Box 79
|
Bogota, TN 38007
|
|
|
We accept all all major credit cards, personal or certified checks and wire transfers.
|
© 2001 Just Liners, Inc. All Rights Reserved.
|
Shipping is not included in product prices unless otherwise specified.
|
We only ship within the 48 U.S. Continental States.
|
We do not ship internationally due to stricter customs regulations.
|
|
