|
UltraGuard Specification Sheet
20 Mil
Polymeric Alloy
| Property |
Test
Method |
Performance |
| Thickness
(nominal) |
|
20
Mils |
| Thickness
(mils min) |
ASTM
D1593 |
19 |
| Sp
gravity (min) |
ASTM
D792(A) |
1.25 |
|
Tensile
Properties (min)
|
Breaking
Strength (lbs/in)
MD
TD
|
ASTM D882
|
36
36 |
Elongation
at Break (lbs/in)
MD
TD |
ASTM
D882
|
350
350
|
Modulus
at 100% (lbs/in) MD
TD
|
ASTM D882
|
12
12
|
Tear
Resistance (lbs min)
|
ASTM
D1004
(Die C) |
4
|
| Low
Temperature (Pass C) |
ASTM
D1790 |
-26 |
Dimensional
Stablity
(% Max Change) MD
TD
|
ASTM D1204
100°C 16 mins
|
5
5 |
Water
Extraction
(% loss, max) |
ASTM
D3053 |
0.25 |
Volable
Loss
(% loss, max) |
ASTM
D1203(A) |
0.6 |
Disclaimer: To the best of our knowledge, these are typical
property values and are intended as guides only, not as specification
limits. Just Liners makes no warranties as to the fitness
for a specific use or merchantability of products referred
to, no guarantee of satisfactory results from reliance upon
contained information or recommendations and disclaims all
liability for resulting loss or damage.
Back to top
Contact Information:
|
| Telephone: 1-888-838-4017 |
Fax: 1-877-878-6813
|
Mail Address: Just Liners, Inc.
|
P. O. Box 79
|
Bogota, TN 38007
|
|
|
We accept all all major credit cards, personal or certified checks and wire transfers.
|
© 2001 Just Liners, Inc. All Rights Reserved.
|
Shipping is not included in product prices unless otherwise specified.
|
We only ship within the 48 U.S. Continental States.
|
We do not ship internationally due to stricter customs regulations.
|
|
